Air conditioning North Brisbane
Air Conditioning North Brisbane: one trusted installer, no ring-around
It’s 34 degrees, the aircon’s dead and every installer you ring is booked out or not answering. Skip all that: one short form and the right licensed local aircon tech for your job calls you.
- Licence and insurance already checked
- One hand-picked installer, no ring-around
- Fair, upfront written quotes
Tell us the job. We’ll send the right aircon tech.
30 seconds. Free, no obligation, no chasing.
Finding an aircon tech shouldn’t be harder than the heatwave
You know the drill. The first proper hot week hits, the bedroom unit gives up, and you start ringing. Voicemail. A bloke who says he’ll get back to you and never does. Someone who books a quote visit, so you take the morning off, and then doesn’t show. When three quotes finally turn up, none of them line up: different brands, different sizes, different ideas of what a ‘standard install’ is. And you still don’t know which of them is actually licensed.
Meanwhile the house is an oven, you’re losing days, and it’s tempting to grab whoever answers first. That’s how people end up with an undersized unit, a dodgy pipe run or a job that has to be done twice.
Breathe out. That’s the bit we’ve already done. We hand-pick local aircon installers, check their licences and insurance, look at their track record, and only keep the ones who quote upfront in writing and call back. You fill in one form, about 30 seconds, and one installer who suits your job gets in touch. That’s it. That’s the whole process.
Brick lowset in Aspley, two-storey in North Lakes, older Queenslander in Nundah or a unit near Chermside, we choose who’s right for the job. They quote you directly, do the work under their own licences, and you decide whether to go ahead. Free for you, no obligation.
Services
Aircon jobs we can sort for you
From a single bedroom split to whole-of-home ducted, here’s the work the installers we pick handle across North Brisbane.
Split System Installation
Skip the ring-around and get a bedroom or living room split sized right and quoted upfront.
Learn more
Ducted Air Conditioning
Whole-home zoned ducted, without trying to decode three quotes that don’t line up.
Learn more
Servicing & Cleaning
Musty smell or weak airflow? One vetted tech cleans and checks your system before summer.
Learn more
Aircon Repairs
Aircon dead in the heat and nobody answering? One vetted tech finds the fault and quotes the fix.
Learn more
Multi-Head Systems
One outdoor unit, several rooms, and one vetted installer who’ll tell you straight if it suits.
Learn more
Commercial Air Conditioning
Hot shop, no-show contractors? One vetted installer for offices, shops, clinics and warehouses.
Learn more
Aircon Replacement
Old unit on its last legs? One vetted installer swaps it out, without the quote-chasing.
Learn more
Back-to-Back Installs
The simplest split install, quoted clearly by one vetted installer instead of a ring-around.
Learn more
The difference
Finding an aircon installer the usual way vs. with us
Same goal. Very different afternoon.
The usual way
- Ring five numbers, get three voicemails
- Wait on call-backs that never come
- Take a morning off for a quote visit that doesn’t happen
- Juggle three quotes that don’t line up
- Guess who’s actually ARCtick licensed
- Grab whoever’s free and hope for the best
With Air Conditioning North Brisbane
- Fill in one 30-second form
- One installer who’s agreed to call you back fast
- No-shows get dropped from our list
- One clear written quote, upfront
- Licence and insurance checked before they join
- The right installer for your job, picked for you
How it works
How it works
01
Tell us the job
Pop in your suburb, what you need (new install, service or repair) and the rooms involved. Photos of the walls and switchboard help. It takes about 30 seconds.
02
We pick the right installer
We match your job to one vetted local installer based on the type of work, your suburb and who’s available.
03
They call you
Your installer gets in touch, books a look if needed and gives you a written quote. No obligation. If it suits, you book directly with them.
Who’s actually licensed? We’ve already checked.
Most people have no idea what licences an aircon installer needs, and fair enough. Ring around and you’ll get five different answers, plus someone’s cousin who ‘can do it cheap’. Get it wrong and you risk an unsafe electrical connection or a warranty claim that goes nowhere.
Here’s the short version. The refrigerant side (connecting the pipework, pressure testing, vacuuming and charging) needs a refrigerant handling licence from the Australian Refrigeration Council, known as ARCtick. The electrical side (a circuit from your switchboard and an isolator at the outdoor unit) needs a Queensland electrical licence. Some installers hold both; others team up with a licensed electrician. Either is fine, as long as both parts are done by licensed people. Bigger building-type jobs can also need QBCC licensing.
Sorted. We check every installer’s licences and insurance before they join, so you’re not chasing licence numbers on a hot afternoon. You’re still welcome to ask for them, and a good installer will happily show you.
Costs
What air conditioning costs in North Brisbane
These are indicative supply-and-install ranges drawn from published Brisbane pricing. Your quote will depend on the brand, pipe run, access, wall type and your switchboard.
| Job | Indicative cost | What affects it |
|---|---|---|
| Split system 2.5 kW (bedroom) | $1,200–$2,500 | Standard back-to-back install, single storey |
| Split system 3.5 kW | $1,400–$2,800 | Larger bedroom or small living area |
| Split system 5 kW | $1,800–$3,500 | Medium living area |
| Split system 7 kW | $2,200–$4,500 | Open-plan living and dining |
| Split system 9 kW | $3,000–$5,500 | Large open-plan spaces |
| Multi-head (2 indoor units) | $4,000–$7,500 | One outdoor unit |
| Ducted, 2–3 bedroom home | $8,000–$14,000 | Basic system, limited zoning |
| Ducted, 4+ bedroom, zoned | $12,000–$22,000 | Zoning and smart controller |
| Split system service and clean | $100–$320 | Per unit |
Indicative only, GST inclusive, based on published Brisbane pricing guides at the time of writing. These are not our prices. Always get a written quote from the contractor.
Why use us
What we check before a tradie gets your job
We do the vetting up front, so you’re not doing it on a stinking hot afternoon.
- ARCtick refrigerant handling licence verified on the public register
- Queensland electrical licence verified, whether they hold it or work with a licensed electrician
- QBCC licence checked where the job needs one
- Public liability insurance sighted
- Local to North Brisbane and Moreton Bay, not driving in from across town
- Track record and reviews checked
- Upfront written quotes that spell out what’s included: pipe length, brackets, circuit and isolator
- Agreed to call you back fast
- Dropped if they don’t measure up
Choosing the right system for a northside home
Split systems suit most homes where you want to cool one to three rooms. They’re the most affordable way to get started, each room runs independently, and a bedroom unit in a typical brick home is usually a straightforward job. Expect a 2.5 kW unit for a small bedroom, 3.5 kW for a main bedroom and 5 to 8 kW for living areas, depending on ceiling height, insulation and how much western sun the room gets.
Ducted systems make sense when you want most of the house cooled, have enough roof space for the indoor unit and ductwork, and prefer vents over wall units. Zoning lets you shut off rooms you aren’t using, which keeps running costs down. Many two-storey homes in newer estates suit ducted well; older Queenslanders with low-pitched or no roof space can be harder.
Multi-head systems run several indoor units off one outdoor unit. They help in townhouses and units where there is only room for one condenser, but they cost more than two separate splits and if the outdoor unit fails, every room goes warm at once.
Reverse cycle is the norm in Brisbane. You will mostly use cooling and the dry mode for humid days, but it is also one of the cheaper ways to take the chill off winter mornings.
Areas we cover
North Brisbane and Moreton Bay suburbs we cover
We line up trusted local installers right across the northside, from Nundah and Kedron out to Albany Creek, Strathpine, North Lakes and the Redcliffe Peninsula.
Hills District
North Lakes corridor
North-west
Caboolture district
Bribie & coast
Also servicing Stafford Heights, Wavell Heights, Zillmere, Bald Hills, Fitzgibbon, McDowall, Ferny Hills, Eatons Hill.
Common questions
Common questions
Are you an air conditioning installer?
No, and that’s the point. We do the finding, checking and choosing; the installer does the aircon. We pick one licensed local installer who suits your job, and they quote, contract and do the work directly with you, including the workmanship warranty. You get a trusted tradie without the ring-around.
How do you choose the tradie?
We look at three things: the type of job, your suburb and who’s available. A ducted retrofit, a bedroom split, a repair or a commercial job goes to an installer who does that kind of work day in, day out. Every installer on our list has had their licences and insurance checked and their track record looked at, and has agreed to quote upfront in writing and call you back fast.
Does it cost anything to use the service?
No, it’s free for you. You only pay the installer, and only if you accept their quote and book the work. There’s no sign-up, no membership and no obligation. If the quote doesn’t suit, just say no thanks. If the installer isn’t the right fit for you, tell us and we’ll line up another.
What licences should an aircon installer hold in Queensland?
The refrigerant work needs a refrigerant handling licence from the Australian Refrigeration Council, known as ARCtick. Connecting the system to your power needs an appropriate Queensland electrical licence. Some larger jobs may also need QBCC licensing. We check every installer’s licences before they join, and you’re welcome to ask to see them.
How much does a split system cost to install in North Brisbane?
As a rough guide, a 2.5 to 3.5 kW bedroom split system supplied and installed back-to-back typically lands between about $1,200 and $2,800. Larger 7 to 9 kW living-room units run from about $2,200 to $5,500. Long pipe runs, two-storey access and switchboard upgrades add to that. Get a written quote for your home.
How quickly can someone come out?
It depends on the time of year and the job. The installers we pick have agreed to call you back fast, and outside peak season most can arrange a quote visit within a few days. The first hot weeks of spring and summer are when everyone else is ringing around too, so if you’re planning a new system, enquire in winter or early spring.
Which brands can the contractors install?
Most installers work with the major brands sold in Australia, such as Daikin, Mitsubishi Electric, Mitsubishi Heavy Industries, Fujitsu, Panasonic, LG, Samsung and Actron. If you already have a preferred brand or model, mention it in your enquiry. If not, the contractor can explain the options at different price points.
Do I need a quote visit or can I get a price over the phone?
A simple back-to-back bedroom install can often be priced from a few photos showing the inside wall, the outside wall and your switchboard. Ducted systems, multi-head systems, two-storey jobs and anything with a long pipe run usually need a site visit so the contractor can check roof space, access and electrical capacity.
Skip the ring-around
Skip the ring-around
Tell us the job. We’ll send the right aircon installer for it, and they’ll call you to sort a quote.
Tell us the job. We’ll send the right aircon tech.
30 seconds. Free, no obligation, no chasing.